GCLD type drum gear coupling

GCLD typeDrum gear couplingIt is a rigid-flexible coupling. The gear coupling is composed of an internal gear ring with the same number of teeth and a flange half coupling with external teeth.The external teeth are divided into straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. Drum-shaped gear couplings allow Larger angular displacement (compared to straight tooth coupling) can improve the contact conditions of the teeth, increase the torque transmission capacity, and prolong the service life.It has the ability to compensate for axis deviation in radial, axial and angular directions. It has the advantages of compact structure, small turning radius, large carrying capacity, high transmission efficiency, low noise and long maintenance cycle. It is especially suitable for low-speed and heavy-duty conditions, such as Metallurgy, mining, lifting and transportation industries, and also suitable for shafting transmission of various machinery such as petroleum, chemical industry, general machinery and so on.

When the GCLD type drum gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling needs Work in a good and sealed state.Gear couplings have small radial dimensions and large load-bearing capacity. They are often used in shafting transmissions under low-speed and heavy-duty conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine shafting. transmission.Since the angular compensation of drum-shaped gear couplings is greater than that of straight-tooth couplings, drum-shaped gear couplings are widely used. Straight-tooth couplings are obsolete products and should not be used as much as possible.

The characteristics of the drum gear coupling (compared with the straight gear coupling, it has the following characteristics):

1. Strong carrying capacity.Under the same outer diameter of the inner gear sleeve and the outer diameter of the coupling, the carrying capacity of the drum gear coupling is 15-20% higher than that of the straight gear coupling on average.

2. Large angular displacement compensation.When the radial displacement is equal to zero, the allowable angular displacement of the spur gear coupling is 1°, and the allowable angular displacement of the drum gear coupling is 1°30', an increase of 50%.Under the same modulus, number of teeth, and tooth width, the allowable angular displacement of the drum tooth is larger than that of the straight tooth.

3. The drum-shaped tooth surface improves the contact conditions of the inner and outer teeth, avoids the disadvantages of squeezing the edge of the straight tooth and stress concentration under the condition of angular displacement, and at the same time improves the friction and wear of the tooth surface, and reduces the noise. , Long maintenance cycle.

4. The tooth end of the outer gear sleeve is in the shape of a horn, which makes the assembly and disassembly of the inner and outer teeth very convenient.

5. High transmission efficiency.

Based on the above characteristics, at present, drum-shaped teeth have generally been substituted for straight-tooth couplings.

Basic parameters and main dimensions of GCLD motor shaft extension drum gear coupling JB/T 8854.1-2001

Basic parameters and main dimensions of GCLD motor shaft extension drum gear coupling (continued) JB/T 8854.1-2001