Product Series
-
Coupling diaphragm
-
Diaphragm coupling
-
Drum gear coupling
-
Tyre coupling
-
Plum elastic coupling
-
Star flexible coupling
-
Elastic pin coupling
-
Elastic sleeve pin coupling
-
Elastic pin gear coupling
-
Serpentine spring coupling
-
Roller chain coupling
-
Clamping coupling
-
Flange coupling
-
Slider coupling
-
H-type flexible coupling
-
Coupling accessories
Company News
MOREFCL type elastic sleeve pin coupling
FCL type elastic sleevePin couplingIt is characterized by simple structure, convenient installation, easy replacement, small size and light weight, so it is widely used. If the relative displacement of the two shafts can be maintained within the specified range after installation and adjustment, the coupling will have satisfactory performance and Long working life.Therefore, it can be widely used in various medium and small power transmission shaft systems driven by electric motors with small loads, such as reducers, cranes, compressors, conveyors, textile machines, hoists, ball mills, etc.
弹性套柱销联轴器的许用相对位移: 径向位移:0.2~0.6mm 角位移:0°30′~1°30′
The reason why the allowable compensation amount for the axis displacement of the FCL elastic sleeve pin coupling is less is as follows:
1. FCL-type elastic sleeve pin coupling relies on the locking force of the pin group to generate the frictional torque on the contact surface, and compress the rubber elastic sleeve to transmit the torque.It is suitable for small and medium-power shafting transmissions with good rigidity of the installation base, high centering accuracy, low impact load, and low vibration reduction requirements.
2. The elastic sleeve works by compression and deformation. Because the thickness of the elastic sleeve is thin, the volume is small, and the elastic deformation is limited, the elastic sleeve pin coupling can compensate the axis displacement and elasticity, but the allowable compensation amount for the axis displacement is relatively large. Less, weaker elasticity.
XNUMX. FCL type elastic sleeve pin coupling has a relatively simple structure, easy to manufacture, no lubrication, no need to bond with metal vulcanization, easy to change the elastic sleeve, no need to move the half coupling, with greater compensation for the relative deviation of the two shafts And damping and buffering performance.
Model Type | Allowable torque Max torque Nm | Allowable speed Max speed r/min | D | D 1 | d 1 | L | C | nM | Weight kg |
FCL90 | 4 | 4000 | 90 | 35.5 | 11 | 28 | 3 | 4-M8×50 | 1.7 |
FCL100 | 10 | 4000 | 100 | 40 | 11 | 35.5 | 3 | 4-M10×56 | 2.3 |
FCL112 | 16 | 4000 | 112 | 45 | 13 | 40 | 3 | 4-M10×56 | 2.8 |
FCL125 | 25 | 4000 | 125 | 50 | 13 | 45 | 3 | 4-M12×64 | 4.0 |
FCL140 | 50 | 4000 | 140 | 63 | 13 | 50 | 3 | 6-M12×64 | 5.4 |
FCL160 | 110 | 4000 | 160 | 80 | 15 | 56 | 3 | 8-M12×64 | 8.0 |
FCL180 | 157 | 3500 | 180 | 90 | 15 | 63 | 3 | 8-M12×64 | 10.5 |
FCL200 | 245 | 3200 | 200 | 100 | 21 | 71 | 4 | 8-M20×85 | 16.2 |
FCL224 | 392 | 2850 | 224 | 112 | 21 | 80 | 4 | 8-M20×85 | 21.3 |
FCL220 | 618 | 2550 | 250 | 125 | 25 | 90 | 4 | 8-M24×110 | 31.6 |
FCL280 | 980 | 2300 | 280 | 140 | 34 | 100 | 4 | 8-M24×116 | 44.0 |
FCL315 | 1568 | 2050 | 315 | 160 | 41 | 112 | 4 | 10-M24×116 | 57.7 |
FCL355 | 2450 | 1800 | 355 | 180 | 60 | 125 | 5 | 8-M30×50 | 89.5 |
FCL400 | 3920 | 1600 | 400 | 200 | 60 | 125 | 5 | 10-M30×150 | 113 |
FCL450 | 6174 | 1400 | 450 | 224 | 65 | 140 | 5 | 12-M30×150 | 145 |
FCL560 | 9800 | 1150 | 560 | 250 | 85 | 160 | 5 | 14-M30×150 | 229 |
FCL630 | 15680 | 1000 | 630 | 280 | 95 | 180 | 5 | 18-M30×150 | 296 |