Material Handling Energy UNIT

Materials Handling Power UNIT 2
Basic Description
This energy unit options power up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve with the decreasing velocity managed through the strain compensated movement handle valve. Merchandise of this series may be extensively used in the marketplace of logistic products which include fork lift, mini lift table, and so forth.
Unique Notes
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities, N46 hydraulic oil is encouraged .
4. Oil transforming is required right after the original one hundred operation hrs,afterwards after every single 3000 hours.
five. The electrical power unit really should be mounted horizontally.

Material Handling Energy UNIT one
Common Description
This power unit is developed for your fork lift marketplace, consisting of highly effective gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down motion are controlled from the lever of your manual release valve, which can be outfitted with an electric switch to activate the motor. The lowing speed is controlled by the pressure compensated flow handle valve.
Distinctive Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned prior to installation of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities, N46 hydraulic oil is recommended .
four. Oil changing is required right after the preliminary 100 operation hours, afterwards after every single 3000 hours.
5. The electrical power unit shown is intended to be mounted horizontally.

Tags: