The diaphragm of the diaphragm coupling is excellent in workmanship and reliable in quality

Coupling accessories stainless steel JMIJ/JMJ type diaphragm coupling diaphragm In order to prevent the diaphragm from fretting and abrasion during high-speed operation, resulting in micro-cracking and damage to the diaphragm bolt hole, disulfide can be applied between the diaphragms Solid lubricants such as molybdenum or the anti-friction coating treatment on the surface of the diaphragm are generally composed of several groups of diaphragms that are alternately connected to the two halves of the coupling with bolts. Each group of diaphragms is composed of several pieces. It is made of stainless steel 304. After wire cutting, it is pierced with iron buckles and riveted.The bolt holes of the diaphragm coupling are all reamed out, one large and one small, and the other is reversed.

Diaphragm is divided into connecting rod type and whole piece type of different shapes.The diaphragm of the stainless steel diaphragm coupling compensates the relative displacement of the two shafts connected by the elastic deformation of the diaphragm. It is a high-performance flexible coupling with metal elastic elements. It does not require lubrication, and has a compact structure and high strength. It has a long service life, no rotation gap, and is not affected by temperature and oil pollution. It has the characteristics of acid resistance, alkali resistance and corrosion resistance.Key points for the use of diaphragm coupling diaphragm products: Appropriate safety protection measures must be taken at various sites that may cause personal and equipment accidents due to the operating diaphragm coupling diaphragm. In work and operation, the diaphragm coupling should be checked frequently Whether there is any abnormality in the device, if any abnormality occurs, it must be repaired immediately.

Our factory specializes in the production of various coupling accessories, including: LA, RF tire coupling tire body, nylon sleeve inner gear ring, coupling roller chain, GR-shaped coupling elastic body, T-shaped plum blossom hexagonal water pump Wheel pads, stainless steel diaphragm coupling diaphragms and other accessories, complete in variety, nominal torque: 25-6300, allowable speed: 1600-6000, shaft hole diameter: 14-125 shaft hole length: 90-120, JMIJ Standard number of type diaphragm coupling: JB/T 9147-1999.Maximum outer diameter: 90-340mm.

Among them, the stainless steel diaphragm coupling diaphragm has excellent workmanship, reliable quality, and has reached the leading level in the domestic industry. It is widely used in steel rolling, lifting, forging, petroleum and other large equipment and other various mechanical equipment. The end faces of the two shafts should be cleaned before installation. , Check the fit of the end face key notch, etc. After installation, all screws must be checked for normal operation in one shift. If found to be loose, they must be tightened. Repeat this for several shifts to ensure that they will not become loose.In practical applications, therefore, two sets of diaphragms are required to be installed at the joint to play a buffering role on a set of diaphragm couplings.Diaphragm couplings generally adopt the intermediate shaft type to improve the performance of two-axis offset compensation. This is the biggest advantage of this type of diaphragm coupling, so there are many choices.

Original article of diaphragm coupling equipment manufacturer, please indicate the source address for reprinting: http://www.hbcrjx.com