News-Hangzhou Hengli Transmission Co., Ltd.

The diaphragm elastic coupling is composed of several groups of diaphragms that are alternately connected to the two halves of the coupling with bolts, and each group of diaphragms is formed by stacking several pieces.The elastic deformation of the diaphragm compensates for the relative displacement of the two connected shafts, which is a high-performance...

The design of the coupling considers the axial displacement between the two to be connected, and its value should be greater than 6mm.When the coupling is installed, a compensation amount should be reserved in the direction of thermal expansion.The structure of the gear coupling without spacers allows...

Measured dimensions of the two diaphragm sets of the coupling 1. Before installation, check whether the prime mover and the working machine are concentric, whether there are wrapping paper and scratches on the surfaces of the two shafts, and whether the inner holes of the two half couplings of the coupling There are debris, the inner hole edge...

Use heating method to make the plum blossom coupling heat expansion or use cooling method to make the shaft end cold and shrink, so that the tire coupling can be easily installed on the shaft.This method has more advantages than static press-in method and dynamic press-in method...

After the diaphragm coupling is assembled on the shaft, the verticality and coaxiality of the gear coupling and the shaft should be carefully checked.Generally, two dial indicators are set on the end face and outer circle of the gear coupling. When the shaft is rotated by the turning car, observe the teeth...