Product Description

CPVC SCH80 HIGH PRESSURE PIPING SYSTEM (ASTM F437/F439)
PRODUCT INTRODUCTION
Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68% up to more than 70%. CPVC tensile capacity is higher than the UPVC, PP, PP- B, PP- RH, PB, HDPE, PE, PE -X RT, etc; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP UPVC, ABS and HDPE.
CPVC compounds, which be used in extruded or molded for pipes and fittings, match the standard ASTM D1784. CPVC SCH80 pipes can match the standard ASTM F441. CPVC SCH80 threaded fittings can match the standard ASTM F437. CPVC SCH80 socket fittings can match the standard ASTM F439.
FEATURES OF PRODUCT
Safety and Health:
The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard.
Flame Retardant:
Limited oxygen index of CPVC material is 60%. The minimum ignition temperature is 482C. No dropping fire, very low smoke rate and no poisonous gas. CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of chemical.
Low Thermal Expansion Coefficient:
CPVC material has low coefficient of thermal expansion.
Pressure Rating:
The minimum burst strength of 1/2″pipe are 18 M pa, at the condition of 73 F water.
Long Service Life:
CPVC material has strong antioxidant and aging resistance performance than other material in utilization.
FIELDS OF APPLICATION
Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc
Piping networks for pure water, drinking water and food processing plant
Piping networks for transferring liquid in chemical manufacturing plant, pulp or paper plant
Piping networks for transferring liquid in waste water treatment plant
Piping networks for transferring liquid in metal treating or electroplating plant
Piping networks for transferring liquid in semiconductor or electronic plant

SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.
MORE PRODUCT

OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.

OUR COMPANY

FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Common Maintenance Practices for Industrial Couplings to Ensure Optimal Performance

Proper maintenance of industrial couplings is essential to ensure their optimal performance and prolong their service life. Regular maintenance practices can help identify potential issues early on, prevent unexpected failures, and maintain the efficiency of power transmission systems. Here are some common maintenance practices for industrial couplings:

• Visual Inspection: Perform regular visual inspections of the couplings to check for any signs of wear, damage, or misalignment. Look for cracks, corrosion, or excessive vibration marks that may indicate a problem.
• Lubrication: Some types of couplings require lubrication for smooth operation. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication. Regularly check and replenish the lubricant as needed.
• Bolt Tightening: Check the tightness of coupling bolts and fasteners periodically. Loose bolts can lead to misalignment and reduced coupling performance. Ensure that the bolts are properly torqued to the manufacturer’s specifications.
• Alignment Check: Regularly inspect and assess the alignment of the connected shafts. Misalignment can lead to premature wear and failure of the coupling. Realign the shafts if necessary to maintain proper coupling operation.
• Balance Check: In high-speed applications, ensure that the coupling is properly balanced to avoid excessive vibrations and potential damage to the machinery. Imbalanced couplings can lead to increased stress on bearings and other components.
• Temperature Monitoring: Monitor the operating temperature of the coupling during normal operation. Drastic temperature increases may indicate issues with lubrication or misalignment. Address any temperature abnormalities promptly.
• Inspect Flexible Elements: For flexible couplings, inspect the flexible elements, such as elastomeric inserts or diaphragms, for signs of wear or deterioration. Replace worn or damaged elements to maintain the coupling’s performance.
• Regular Maintenance Schedule: Establish a regular maintenance schedule for the industrial couplings based on the manufacturer’s recommendations and the specific operating conditions of the machinery. Stick to the schedule to prevent potential problems and ensure the couplings are always in optimal condition.
• Keep the Environment Clean: Maintain a clean environment around the couplings to prevent the accumulation of dirt, debris, or contaminants that can interfere with their operation.
• Training and Education: Ensure that personnel responsible for coupling maintenance receive proper training and education on best practices. Knowledgeable maintenance staff can perform inspections more effectively and identify potential issues proactively.

By implementing these common maintenance practices, industrial facilities can maximize the performance and longevity of their couplings, minimize downtime, and avoid costly repairs or replacements. Regular maintenance not only ensures optimal coupling operation but also contributes to the overall efficiency and reliability of power transmission systems in industrial applications.

Specific Couplings Designed for High-Temperature or Corrosive Environments

Yes, there are specific couplings designed to operate in high-temperature or corrosive environments. These specialized couplings are constructed using materials and designs that can withstand extreme conditions without compromising performance. Here are some examples of couplings tailored for such environments:

• High-Temperature Couplings: In applications where machinery operates at elevated temperatures, standard couplings made of conventional materials may not be suitable due to their limited thermal resistance. High-temperature couplings are engineered with materials like heat-resistant alloys or ceramics that can withstand extreme heat without degrading or losing their mechanical properties. These couplings are often used in industries such as steel manufacturing, glass production, and aerospace, where the equipment encounters high temperatures during normal operation.
• Corrosion-Resistant Couplings: Industries dealing with corrosive substances or harsh environments require couplings that can resist chemical attack and degradation. Corrosion-resistant couplings are typically made of stainless steel or other alloys with excellent corrosion resistance properties. These couplings protect against the effects of acids, alkaline solutions, and other corrosive elements, ensuring a longer service life and reliable operation. They are commonly used in chemical processing, petrochemical, and marine applications.
• Composite Couplings: Composite materials can offer a combination of properties that make them suitable for challenging environments. For instance, fiber-reinforced composite couplings can provide high strength, lightweight, and resistance to both high temperatures and corrosive substances. These couplings find applications in aerospace, automotive, and other industries where weight reduction and durability are crucial factors.
• Non-Metallic Couplings: Non-metallic couplings made of materials like plastic or reinforced polymers offer excellent resistance to corrosion, chemicals, and extreme temperatures. These couplings are often used in food and beverage processing, pharmaceuticals, and other industries where hygienic conditions and resistance to aggressive substances are essential.

It is crucial to select the appropriate coupling that matches the specific requirements of the operating environment. Using standard couplings in high-temperature or corrosive settings can lead to premature failure, increased maintenance, and safety risks. By opting for couplings designed explicitly for such conditions, industries can ensure the reliability and longevity of their equipment and maintain optimal performance even in the most challenging environments.

Advantages and Disadvantages of Using Flexible Couplings in Industrial Setups

Flexible couplings offer several advantages in industrial setups, but they also come with some disadvantages. Here’s a detailed overview of both aspects:

Advantages:

• Misalignment Compensation: Flexible couplings can compensate for various types of misalignment, including angular, axial, and parallel misalignment. This capability reduces stress on connected machinery, bearings, and shafts, resulting in extended component life and improved reliability.
• Vibration Dampening: Flexible couplings can absorb and dampen vibrations, preventing them from being transmitted to other parts of the machinery or equipment. This feature helps reduce noise and minimizes wear and tear on the system, leading to smoother operation and decreased maintenance requirements.
• Shock Absorption: Some types of flexible couplings, such as grid and elastomeric couplings, offer excellent shock absorption properties. They can handle sudden load changes and impacts, making them suitable for applications with varying loads or in environments prone to shock forces.
• Torsional Flexibility: Flexible couplings provide torsional flexibility, allowing for slight angular displacement between connected shafts. This flexibility helps prevent torsional vibrations and mechanical resonance, improving the overall stability and performance of the machinery.
• Easy Installation and Maintenance: Most flexible couplings are relatively easy to install and require minimal maintenance. They often do not need lubrication, reducing maintenance efforts and downtime, which can result in cost savings.
• Cost-Effective Solution: Flexible couplings are often more cost-effective than rigid couplings, especially in applications where misalignment compensation and shock absorption are required. They offer a balance between performance and affordability.

Disadvantages:

• Backlash: Some flexible couplings introduce a certain amount of backlash or angular play due to their design. In precision applications, this backlash may result in reduced accuracy and positioning errors.
• Lower Torque Capacity: Compared to some rigid couplings, flexible couplings generally have lower torque capacity. In high-torque applications, careful selection is essential to ensure the coupling can handle the required torque without slipping or failing.
• Limitations on High-Speed Applications: Some types of flexible couplings may have limitations in high-speed applications due to factors like balancing requirements or resonance effects.
• Finite Lifespan: Flexible couplings have a finite lifespan and may require periodic replacement, especially in demanding or high-load applications.

When choosing whether to use flexible couplings in an industrial setup, engineers should carefully consider the specific requirements and operating conditions of the application. While flexible couplings offer significant advantages, they may not be suitable for every scenario. Proper selection and regular maintenance of the coupling can ensure optimal performance and extend its lifespan, contributing to the overall efficiency and reliability of the industrial system.

editor by CX 2024-05-09